pair

A Pair of Acoustic Research AR 1-W Floorstanding Speakers

A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers
A Pair of Acoustic Research AR 1-W Floorstanding Speakers

A Pair of Acoustic Research AR 1-W Floorstanding Speakers
Acoustic Research AR 1-W Floorstanding Speakers. 25X15X14 Sealed acoustic suspension low frequency system. Showing 1-2 of 2. The original first product of Acoustic Research Corp in the late 50’s. Designed by Edgar Villchur. Probably the most brilliant of all the engineers attempting to design smaller systems at the time. The first product was designed to be used with other manufacturers mid ranges and tweeters. I have heard many really good combinations with it. One of the more interesting ones was the combo using a Jantzen 4 panel electrostatic array as a high frequency unit. Some models of the AR-1W had a series air core inductor to prevent anything above 600HZ from being fed to the woofer. In these versions it was debatable whether to by pass the inductor and get the slightly better response above 600 HZ and put up with the 2-3 db increase in output which would make the woofer play noticeably louder than the maximum that the Jantzen could do. I know what you are thnking this would be a perfect case for bi-amping. We did do that with dual Marantz 8b 353/35w power amps and Marantz 2 way electronic crossovers set at various frequencies between 600 and 1200 HZ. I still have the Marantz electronic Xovers that were used on one of these rigs way back in 1960. I think the Jantzens finally bit the dust when the power supplies failed due to poor capacitors and pickled solder joints (a serious long term EMF/dielectric type problem exist with powered electrostatic systems which trys to “pickle” and destroy the wiring and the solder joints). If you ever see any AR-1W’s in an estate sale or garage sale don’t pass them up. The suspensions are fabric and last forever so you won’t ever find one all rotted out on the edges like modern systems. The woofer has an amazing 1.4 inch or so travel and produces really low distortion fundemetal frequecies down as low as 20 HZ about 6 db down. This thing will outperform the vast bulk of the subwoofers made today and runs just fine on a 60 watt amplifier. This same woofer was later used by AR in Villchur’s wonderful classic original AR3 design of 1960-1 and later AR-3A versions with the better (smaller) tweeters. They are tested and works great. The item “A Pair of Acoustic Research AR 1-W Floorstanding Speakers” is in sale since Tuesday, March 24, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Speakers”. The seller is “aikomsakar” and is located in Fort Lauderdale, Florida. This item can be shipped to United States.
  • Brand: Acoustic Research

A Pair of Acoustic Research AR 1-W Floorstanding Speakers

Comments are closed.

Powered by: Wordpress