acoustic

Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED

Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED

Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED
Set of two Acoustic Research AR-7 vintage speakers (circa 1970’s) that was just restored from original shape, which were very good condition already to start with. This is a matching, consecutive serial number set (see photos). The woofers are not the originals from the factory, when I opened them up I found a set of Realistic brand woofers that needed outer seal re-foaming. I replaced them with a set of Acoustic Research woofers that had the same sound characteristics and specifications as the originals (see chart below). The inside of the cabinet was repainted with black satin epoxy paint, the crossovers got a new, fresh set of resistors and 10uf/100V capacitors. The tweeters were cleaned up and still sounded great. New wiring, speaker adjustment pots and conections were cleaned with Deoxit, insulation was replaced, and cabinet was cleaned with Sorensby’s wood treatment and a coat of sealer was applied to finish it off. The biggest change was the speaker grills, which were broken down and restored to look like new. The AR7 badges were cleaned up (but not polished, wanted to keep just a hint of petina on them) and the frames were cleaned up for recovering. I chose a light blue acoustical fabric to give it a different look than all the other AR speakers out there. The fabric is made by Guildford of Maine Sona Acoustical Fabric, a special acoustical line of fabrics made by the best-known maker of acoustical fabrics. Guildford of Maine Sona Acoustical Fabric offers superior sound absorption on a material that is fire resistant and certification rated. This same industry leader makes popular, high-quality fabrics used on acoustical panels in thousands of buildings around the world. The texture and colors give a quality and professional look to your acoustical projects. It’s polyester cotton absorbs sound! Not for use as speaker fabric covering, and meets ASTM E84 Class I or A standards. The weave on this fabric is open enough to let sound pass through and be absorbed and tight enough to mask the appearance of the background behind it. Last thing left to do is to put a set of stick-on felt protector pads for the bottom corners of the speakers, or small screw-in type rubber feet. Whoever buys these speakers can let me know which type they’d prefer or just to have me include them with the package. Cutout Diameter: 7.3. Mounting Depth: 3.44. Diagonal mounting hole to hole: 7.75. Re: 7.6 ohms. Le: 1.09 mH. Fs: 54.7 Hz. Mms: 31.97 g. Sd: 226.9 cm2. BL: 7.69 Tm. Vas: 19.35 liters. VC diamater: 1.5. SPL: 85.4 dB. RMS power: 65 Watts (each speaker). Frequency Response: 55 to 3000Hz. The item “Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED” is in sale since Sunday, May 24, 2020. This item is in the category “Consumer Electronics\Vintage Electronics\Vintage Audio & Video\Vintage Speakers”. The seller is “emailcharles206″ and is located in Kirkland, Washington. This item can be shipped to United States, Canada.
  • Model: AR7
  • MPN: AR7
  • Brand: Acoustic Research

Acoustic Research AR-7 speakers Beautiful Vintage Speakers FULLY RESTORED

Comments are closed.

Powered by: Wordpress